The shoe factory must know that the front upper machine uses the small secret method to save time, improve the output rate and stabilize the product quality. Dongguan Qixin mechanical equipment Co., Ltd. - sole presser, sole presser manufacturer and sole presser manufacturer come to teach you some tips for using automatic front help machine:

The basic operation methods of the front upper mainly include the following:

1、 Put the upper on the last, put some upper of the toe into the opening of the top claw, and step on the start switch (left foot switch) to make the top claw clamp the upper.

2、 Put the remaining upper into the opening of 2.3.4 claws, step on the start switch again, then release it to make the 2.3.4 claws clamp the upper, and then the support platform rises to support the upper.

3、 Press the start switch again, or pull the two control handles with both hands, and the large seat will be lowered (or the sweeping knife will move forward to the pre finishing position), and the equipment will actively finish the finishing action.

4、 After a working cycle, all parts of the machine actively return to the initial state.

5、 Check the tightness of the upper. If the desired effect is not achieved, gently touch the half back switch with your knee to adjust the orientation of the shoe last under the upper to achieve a better effect.

6、 In case of improper operation or abnormal equipment during operation, step on the emergency pedal to return the equipment to the initial state.